John Lewis Washer Dryer JLWD1404 User Manual

JLWD 1404  
1400 spin washer-dryer  
Instruction manual  
Programme time  
30 Minute wash  
Spin  
Off  
90°  
Economy 60°  
60°  
1400  
900  
Prewash  
Wash  
Extra dry  
Store dry  
Iron dry  
Drain  
700  
Rinse  
Softeners  
Rinse  
Economy 40°  
40°  
500  
Rinse hold  
Drain  
None  
Soak 30°  
Cold  
30°  
Extra Automatic Time  
Delay  
start  
Start/  
Pause  
Spin  
Spin Prewash Quick  
rinse  
dry  
dry  
Drying  
Drying  
End  
30°  
40°  
Delicates 30°  
60°  
Economy 40°  
40°  
JLWD1404  
Duvets 40°  
Easy iron 40°  
Drying  
132 987 220  
 
Contents  
For the User  
Maintenance and Cleaning  
Descaling  
After each wash  
Maintenance Wash  
External cleaning  
Cleaning the dispenser drawer  
Cleaning the drawer recess  
Cleaning the filter  
Cleaning the water inlet filter  
The dangers of freezing  
Emergency emptying out  
20-21  
20  
Important Safety Information  
Your New Washer-Dryer  
Description of the Appliance  
Door locked light  
Detergent dispenser drawer  
Child safety feature  
2
4
5
5
5
5
20  
20  
20  
20  
20  
20-21  
21  
The Control Panel  
Programme information  
6-9  
10  
21  
21  
Operating Sequence  
Load the laundry  
Measure out the detergent  
Measure out the fabric softener  
Switch the machine on  
Select the desired programme/temperature  
Select the spin speed or the “None” option  
Select the desired options  
Select the “Delay start”  
Start the programme  
How to change an option or a programme  
during its cycle  
How to interrupt a programme  
How to open the door during the cycle of  
a programme  
11-13  
11  
Something Not Working  
Service and Spare Parts  
22-23  
23  
11  
11  
11  
11  
11  
12  
12  
12  
For the Installer  
Installation Instructions  
Technical Specifications  
Unpacking  
Positioning  
Water inlet  
Water drainage  
Levelling  
Special conditions  
In the interest of the environment  
Electrical connection  
Permanent connection  
24  
24  
25  
25  
26  
26-27  
27  
27  
27-28  
28  
12  
12  
12-13  
13  
End of programme  
Drying 3 kg of cotton  
Autodrying 2 kg of synthetics  
14  
14  
28  
Washing and Drying  
Wash Care Symbols  
Washing Programmes  
Drying Programmes  
15  
16  
17-18  
19  
Guide to use the Instruction Book  
The following symbols will be found in the text to guide you throughout the instructions:  
Safety instructions  
Hints and tips  
Environmental information  
3
 
Your New Washer-Dryer  
Your new washer-dryer, which is fitted with the Jet System, meets all modern requirements for  
effective treatment of laundry with low water, energy and detergent consumption.  
Even small loads are washed “economically” because the amount of water used is regulated  
automatically according to the load and type of fabric.  
The programme progress display shows the programme steps selected, the programme phase which is  
running and the end of the programme.  
The programme selector dial combines the function of programme and temperature selection, making it  
easier to set the programme.  
Automatic cooling of the wash water to 60°C before draining, with the 90°C programme. This reduces  
thermal shock to fabrics, helping to prevent creasing.  
The special wool programme with its new delicate wash system treats your woollens with extreme care.  
The balance control device ensures that the washer-dryer remains stable when spinning.  
The two drying programmes will give your wash that soft, relaxed feel whatever the weather.  
Ecological hints  
To save water and energy and help protect the  
environment, we recommend that you follow these  
hints:  
In the interest  
of the environment  
Materials marked with the symbol  
recyclable.  
are  
Normally soiled laundry may be washed without  
prewashing in order to save detergent, water and  
time (the environment is protected too!).  
Check with your local Council or Environmental  
Health Office to see if there are facilities in your  
area for re-cycling this appliance.  
The machine works more economically if it is fully  
loaded.  
When the appliance is to be scrapped, cut off the  
power supply cable and make the door lock device  
unusable to prevent young children from being  
trapped inside.  
With adequate pre-treatment, stains and limited  
soiling can be removed; the laundry can then be  
washed at a lower temperature.  
Help to keep your country tidy - use authorised  
disposal sites for your old appliance.  
Measure out detergent according to the water  
hardness, the degree of soiling and the quantity of  
laundry being washed.  
Try to load the maximum drying capacity of the  
machine as small loads are uneconomical.  
Always load well spun laundry. The higher the spin  
speed, the lower the electricity consumption and  
the shorter the drying times.  
Important  
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.  
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly  
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute  
the wash load manually and select a spin programme. For more detailed information see the section headed  
“Something Not Working”.  
4
 
Description of the Appliance  
1 Detergent dispenser drawer  
2 Control panel  
1
2
3 Door locked light  
4 Door opening handle  
5 Filter  
Programme time  
30 Minute wash  
Spin  
Off  
90°  
Economy 60°  
60°  
1400  
1200  
900  
Extra dry  
Prewash  
Wash  
Store dry  
Iron dry  
Drain  
Rinse  
Softeners  
Rinse  
Economy 40°  
40°  
700  
Rinse hold  
Drain  
None  
Soak 30°  
Cold  
30°  
Extra Automatic Time  
rinse dry dry  
Delay  
start  
Start/  
Pause  
Spin  
Spin Prewash Quick  
Drying  
Drying  
End  
0°  
40°  
Delicates 30°  
Duvets 40°  
60°  
Economy 40°  
40°  
Easy iron 40°  
Drying  
JLWD1404  
6 Adjustable feet  
3
4
5
Door locked light  
It stays on during the whole programme indicating that  
the door is locked.  
6
When the light goes out, the door can be opened.  
Detergent dispenser drawer  
Prewash  
Main wash  
Fabric softener  
C0110  
Child safety feature  
This machine incorporates a special child safety feature  
to prevent small children from being trapped inside the  
machine.  
To activate this device, rotate the button (without  
pressing it) inside the door clockwise until the groove is  
horizontal. If necessary use a coin.  
To disable this device and restore the possibility of  
closing the door, rotate the button anti-clockwise until  
the groove is vertical.  
P1131  
5
 
The Control Panel  
Programme time  
1400  
1200  
900  
Prewash  
Wash  
30 Minute wash  
Spin  
Off  
90°  
Economy 60°  
60°  
Extra dry  
Store dry  
Iron dry  
Drain  
Rinse  
Softeners  
Rinse  
Economy 40°  
40°  
700  
Rinse hold  
Drain  
None  
Soak 30°  
Cold  
30°  
Extra Automatic Time  
rinse dry dry  
Delay  
start  
Start/  
Pause  
Spin  
Spin Prewash Quick  
Drying  
Drying  
End  
30°  
40°  
Delicates 30°  
60°  
Economy 40°  
40°  
JLWD1404  
Duvet 40°  
Easy iron 40°  
Drying  
4
1
3
5 6 7 8 910  
2
Spin speed  
1 Detergent dispenser drawer  
The following speeds are available for the different  
fabrics:  
2 Programme selector dial  
• Cottons, linen:  
700/900/1200 max 1400 r.p.m.;  
The programme selector dial is divided into following  
sections:  
• Synthetics and wool:  
700 max 900 r.p.m.;  
• Duvet 40°/Delicates 30° and “30 Minute wash”:  
700 r.p.m.  
• Cottons,  
• Synthetics,  
• Delicates  
Position “None”  
Wool  
Hand washing  
/
By selecting the option “None” all the spinning phases  
are cancelled and the machine will not drain the water  
of the last rinse, so as not to crease the laundry.  
If you select this option with programmes for cotton  
and synthetics, the machine will perform some extra  
rinses. To be used for extremely delicate items.  
• Special programmes from “Soak 30°” to “30  
Minute wash”  
• Reset/Off programme Off  
30 Minute wash  
Spin  
Off  
90°  
Economy 60°  
60°  
Drain  
At the end of the cycle, the “Start/Pause” button  
light will flash, the “Rinse hold” pilot light and the  
door locked light illuminate and a static zero will  
appear on the display to indicate that the water must  
be drained.  
Softeners  
Rinse  
Economy 40°  
40°  
Soak 30°  
Cold  
30°  
Drying  
30°  
40°  
Delicates 30°  
Duvets 40°  
60°  
Economy 40°  
40°  
Easy iron 40°  
Drying  
To complete the cycle, choose one of the following  
options:  
The selector dial can be turned either clockwise or  
anticlockwise to select the required wash and drying  
programme .  
Select programme “Drain” and then depress the  
Start/Pause” button:  
The water is emptied out without spinning.  
Attention! Before selecting programme “Drain” the  
selector dial has to be positioned on Off (cancelling).  
Positions “Economy” correspond to an ENERGY  
SAVING programme and “Cold” to a cold wash.  
Before setting the dial to any position ensure that the  
machine is switched off.  
At the end of the programme the selector dial  
must be turned to position “Off.  
Depress Start/Pausebutton: after emptying,  
the machine performs the spin cycle corresponding  
to the type of fabric previously selected.  
Turn the programme selector dial to “Off, select  
the programme “Spin”, reduce eventually the spin  
speed by means of the relevant button and then  
depress the “Start/Pause” button.  
3 “Spin” button  
Press this button repeatedly to change the spin speed,  
if you want your laundry to be spun at a speed  
different from the one proposed by the washer-dryer  
or to select position “None”. The relevant light will  
light up.  
The “None” option cannot be selected for the  
automatic WASHING & DRYING programme.  
6
 
4 “Option” buttons  
6 “ Time dry” button  
If you wish to carry out a timed programme instead of  
an electronic programme push the button until the  
drying time you want appears in the display according  
to the fabrics (cotton or synthetics) you have to dry.  
For Cottons you can select a drying time from 10  
minutes to 130 minutes.  
For Synthetics you can select a time from 10 minutes  
to 100 minutes.  
Depending on the programme, different functions can  
be combined. These must be selected after choosing  
the desired programme and before depressing the  
“”Start/Pause” button.  
When these buttons are pressed, the corresponding  
pilot lights illuminate. When they are pressed again, the  
pilot lights go out.  
If an incorrect option is selected, the pilot lights flash  
for about 2 seconds and the message Err is displayed.  
Press these buttons to select the following options:  
7 “Delay start” button  
• “Prewash”: select this option if you wish your  
laundry to be prewashed before the main wash (not  
available for Wool and “30 Minute wash” and not  
recommended with the programme Duvet 40°).  
The prewash cycle ends with a short spin at 650 rpm  
in programmes for cotton and synthetic fabrics,  
whereas in the programme for delicate fabrics the  
water is only drained. This option can be selected for  
heavily soiled laundry.  
This button makes it possible to delay the starting of  
the programme by up to 24 hours. The delay you have  
selected is shown on the display for about 3 seconds;  
afterwards, the duration of the programme reappears.  
You must select this option after you have set the  
programme and before you press the Start/Pause  
button.  
The time value shown on the display will decrease by  
one unit every hour.  
• “Quick”: select this option for laundry that is only  
slightly soiled in order to obtain a good wash result in  
a short time.  
This option is not available with the Wool  
programmes, the Energy saving programmes  
Economy” and “30 Minute wash.  
The washing time will be reduced according to the  
type of fabric and the selected temperature.  
You can change the delay time at any moment,  
before you press the “Start/Pause” button.  
If you have already pressed the “Start/Pause” button,  
and you wish to change or cancel the delay time,  
proceed as follows:  
• set the machine to PAUSE by pressing the  
“Start/Pause” button;  
• press the “Delay start” button until the display shows  
the desired delay time or  
• “Extra rinse”: this option can be selected with all  
programmes, except the wool programmes and “30  
Minute wash”. The machine performs 4 rinses  
instead of 3.  
• press the “Delay start” button once, to erase the  
delay time. The display will indicate “0 h”.  
This option is recommended for people who are  
allergic to detergents, and areas where the water is  
very soft.  
• press the “Start/Pause” button again.  
Important!  
The door will be locked throughout the delay time.  
If you need to open the door, you must first set the  
washer-dryer to Pause by pressing the Start/Pause  
button. After you have closed the door, press the  
Start/Pause button again.  
5 “Automatic Dry” button  
This button allows you to choose the required degree  
of drying for cottons and synthetics:  
- Extra dry (only for cottons)  
- Store dry (cottons and synthetics)  
- Iron dry (only for cottons)  
8 “Start/Pause” button  
This button has three functions:  
The drying time is automatically adjusted by the  
machine: the laundry will be dried to the selected  
degree of dryness.  
Start: after you have selected the desired programme  
and options, press this button to start the washer-  
dryer. The light above the button will stop flashing  
and remain lit.  
If you have selected a delay time, the countdown will  
begin and will be shown on the display.  
7
 
Pause: when you press this button again, the  
programme in progress is interrupted. The light above  
the button will start flashing. To restart the  
programme from the point at which it was  
interrupted, press the button again.  
The washer-dryer has completed the  
programme: this is indicated by a flashing zero.  
Draining of water: by depressing the “Start/Pause”  
button the water of programme “Soak 30°” is  
emptied out.  
0
When you PAUSE the cycle, and it becomes possible to  
open the door, provided:  
• the washer-dryer is not in the heating or drying  
phase;  
• the level of the water is not high;  
• the drum is not turning.  
After starting the programme, the remaining time is  
updated every minute.  
If all these requirements are met, the door locked light  
goes off.  
Important! You must set the washer-dryer to Pause  
before you make any change in the programme in  
progress.  
1.25  
9 Display (Programme time)  
The following pieces of information are shown on the  
display:  
Selection of drying time in minutes or hours and  
minutes.  
Duration of washing programme in hours and  
minutes, after you have selected a programme (for  
example 2.05).  
Delay start, a time value indicated in hours and  
selected by means of the relevant button.  
2.05  
The delay time is displayed for 3 seconds, then the  
duration of the selected programme reappears.  
After you have pressed the Start/Pause button, the  
countdown begins, and the delay time value decreases  
by one unit every hour.  
The duration is calculated automatically on the basis  
of the maximum recommended load for each type of  
fabric.  
While the programme is running (after you have  
pressed the Start/Pause button), the displayed time  
value decreases by one unit every minute.  
The washer-dryer has stopped with water in the  
tub, when the “None” option has been selected or  
at the end of the “Soak 30°”: this is indicated by a  
static zero.  
8
 
An incorrect option selection has been made:  
this is indicated by the message Err when a function  
incompatible with the current programme is selected.  
An alarm code indicates a fault in the machine  
operation (see the relevant chapter).  
E20  
10 Programme phase indicator  
lights  
When you select a programme, the lights relevant to  
the phases that form the programme light up.  
After you have started the programme, only the light  
relevant to the phase that is currently being carried out  
will remain lit.  
When the programme has finished, the “End” light  
comes on and a flashing zero appears on the display.  
Prewash  
Wash  
Rinse  
Rinse hold  
Drain  
Spin  
Drying  
End  
ATTENTION!  
If you turn the programme selector dial to another  
programme when the machine is working, all the lights  
of the programme progress display will flash for about 2  
seconds but the machine will not perform the new  
selected programme.  
9
 
Softeners  
Programme information  
Hand washed garments can be be starched or softened  
with this programme.  
Easy iron 40°  
The machine performs 1 rinse, followed by a final long  
spin at the maximum speed, which can be reduced by  
depressing the “Spin” button.  
The final spin is foreseen only for cotton items as in the  
spin programme.  
With this programme at 40°C it is possible to wash  
the synthetic garments which must be ironed. The  
laundry is gently washed and spun to prevent the  
fabrics from creasing.  
Soak 30°  
Drain  
This is a special programme for heavily soiled laundry.  
The machine performs a soak of about 30 minutes at  
30°C. At the end of the soak time the machine will  
stop automatically with water left in the tub. The  
display will show a static zero.  
Pour the detergent for the soak programme into the  
compartment marked  
This programme cannot be used for very delicate  
fabrics or wool.  
For emptying out the water of the programme  
Soak 30°” or at the end of a programme with the  
None” option.  
Turn first the programme selector dial to “Off”, then  
select the “Drain” programme and depress the  
Start/Pause” button.  
.
Spin  
Before starting a new washing phase, it is necessary to  
empty out the water by:  
Separate long spin at the max speed for hand washed  
garments. It has to be used for cotton items. You can  
reduce the speed by means of “Spin” button to adapt  
it to the fabrics to be spun.  
Draining only: depress the “Start/Pause” button  
(or turn the programme selector dial to “Off”, then  
to “Drain” programme”. Depress the  
30 Minute wash  
Start/Pause” button again).  
This is a complete programme that can be combined  
with the following options:  
None” and “Delay start”.  
To be used for laundry which is lightly soiled or which  
needs freshening up.  
Max. load 3 kg.  
Washing temperature 30 C.  
Programme duration 30 minutes.  
Final spin speed 700 rpm.  
Draining and spin: turn the programme selector  
dial to Off, select programme “Spin”, reduce  
eventually the spin speed by means of button “Spin”  
and depress “Start/Pause” button.  
Important!  
• If the water is not emptied out within 18 hours, the  
machine empties automatically.  
• At the end of the soak (after having emptied out the  
water) you can select the washing programme. Turn  
first the programme selector dial to “Off, then  
select the programme and depress the  
Off = Reset / Switching the machine off  
To reset a programme or switch the machine off turn  
the selector dial to “Off”.  
Start/Pause” button.  
Now a new programme can be selected.  
Rinse  
With this programme it is possible to rinse and spin the  
garments which have been washed by hand. The  
machine performs 3 rinses, followed by a final long spin  
at the maximum speed. The spin is foreseen only for  
cotton items as in the spin programme.  
If you wish to rinse synthetic or delicate fabrics, the  
spin speed must be reduced by depressing the “Spin”  
button. In this case the final spin will be short.  
10  
 
Operating Sequence  
Before the first wash, we recommend that you run a cotton  
4. Switch the machine on  
Turn the selector dial to the the desired position to  
switch the machine on. To switch the appliance off turn  
it to “Off.  
cycle at 60°C, without any laundry in the machine, to  
remove any manufacturing residue from the drum and tub.  
Pour 1/2 a measure of detergent into the dispenser drawer  
and start the machine.  
WASHING 6 KG OF WHITE COTTON  
AT 90°C  
Suppose you have 6 kg of heavy soiled laundry to wash.  
It is white cotton and is suitable for high temperature  
washing.  
30 Minute wash  
Spin  
Off  
90°  
Economy 60°  
60°  
Drain  
Softeners  
Rinse  
Economy 40°  
40°  
Soak 30°  
Cold  
30°  
Drying  
30°  
40°  
Delicates 30°  
60°  
Economy 40°  
40°  
Duvets 40°  
Easy iron 40°  
Drying  
1.Load the laundry  
Open the door.  
5. Select the desired  
Place the laundry in the drum, one item at a time,  
shaking them out as much as possible.  
programme/temperature  
Close the door.  
Turn the selector dial to 90° programme. The lights  
relevant to the phases that form the programme will  
light up.  
The display will show the duration of the selected  
programme, calculated on the basis of the maximum  
load for each type of fabric. The Start/Pause button  
light will start flashing.  
If the load of laundry to be washed is small, at the  
beginning of the cycle the display will still indicate the  
duration relevant to the maximum load. The duration  
value will be gradually adjusted during the cycle.  
P0004  
2.Measure out the detergent  
Pull out the dispenser drawer until it stops. Measure  
out the amount of detergent required and pour it into  
Prewash  
Wash  
the main wash compartment  
.
Rinse  
If you wish to carry out the prewash or a soak  
programme, pour detergent into the appropriate  
Rinse hold  
Drain  
2.05  
Spin  
compartment marked  
.
Drying  
End  
3.Measure out the fabric softener  
If your laundry needs a soak time, turn the programme  
selector dial to “Soak 30°” and then, before starting a  
washing cycle, empty the water as described in the  
Soak 30°” paragraph.  
If required, pour fabric softener into the compartment  
marked , without exceeding the «MAX» mark.  
6. Select the spin speed or the  
“None” option  
Press the “Spin” button repeatedly button in order to  
select the desired spin speed or the “None” (rinse  
hold) option. If you select the “None” option, all the  
spinning phases are suppressed and the machine will  
stop at the end of the programme with the water still  
in the tub.  
C0111  
C0112  
Close the drawer gently.  
11  
 
The relevant light will light up.  
9. Start the programme  
Press the “Start/Pause” button. The relevant light will  
stop flashing, and only the light relevant to the phase  
that is in progress will remain lit.  
If you have chosen a delayed start, the washer dryer  
will begin the countdown.  
1400  
1200  
900  
700  
None  
Spin  
The display will show the duration of the programme  
or the selected delay.  
10. How to change an option  
or a programme during its  
cycle  
7. Select the desired options  
If your laundry is very dirty, it may be advisable to  
select the “Prewash” option.  
If your laundry is only slightly soiled, select the  
Quick” option.  
If you wish the laundry to undergo an extra rinse,  
select the “Extra Rinse” option.  
The relevant light illuminates.  
It is possible to change any option before the  
programme carries it out.  
Before you make any change, you must pause the  
machine by pressing the “Start/Pause” button.  
Changing a running programme is possible only by  
resetting it.  
Turn the programme selector dial to “Offand then  
to the new programme position.  
Start the new programme by depressing the  
Start/Pause” button. The washing water in the tub  
will not emptied out.  
Extra  
rinse  
Prewash Quick  
11. How to interrupt a  
programme  
Depress the “Start/Pause” button to interrupt a  
programme which is running, the corresponding light  
starts to flash. Depress the button again to restart the  
programme.  
8. Select the “Delay start”  
Before you start the programme, if you wish the  
start to be delayed, press the “Delay start” button  
repeatedly, or keep it pressed, to select the desired  
delay. The selected delay time value (up to 24 hours)  
will appear on the display for 3 seconds, then the  
duration of the programme will appear again.  
12. How to open the door  
during the cycle of a  
programme  
You can open the door, after having set the washing  
machine to Pause, provided the following conditions  
exist:  
Delay  
start  
• the machine is not in the heating phase beyond 55°C;  
• the level of the water is not high;  
• the drum is not turning.  
If these requirements are met, when you pause the  
washer dryer, the door locked light goes off and the  
door can be opened.  
12  
 
Should it not be possible to open the door, and should  
it be absolutely necessary to do so, switch the machine  
off by turning the selector dial to “Off”.  
After approximately 3 minutes, you can open the door.  
Pay attention to the level and temperature of  
the water in the washing machine!  
When you close the door to restart the programme  
turn the dial to the previous programme repeating the  
options previously selected and press “Start/Pause”  
button.  
13. End of programme  
At the end of the programme, the machine stops  
automatically and displays a flashing zero.  
If the “None” option has been selected, the light of the  
Start/Pause” button flashes, a static zero appears on  
the display, the “Rinse hold” pilot light and the door  
locked light are on to indicate that the water must be  
emptied out before opening the door.  
To drain the water or to spin see the paragraphs  
Draining only” or “Draining and spin” on page 10.  
The door can only be opened when the door locked  
light has gone off.  
Release of the lock is also indicated by the illumination  
of the “End” light.  
Turn the programme selector dial to Reset “Off” to  
switch the machine off.  
Remove the laundry from the washer dryer.  
Check whether the drum is completely empty, by  
rotating it with your hand. The purpose of this is to  
prevent any items of laundry from remaining  
accidentally in the drum, where they might get damaged  
in a subsequent wash (e.g. by shrinking) or bleed colour  
into another load of laundry.  
We advise you to close the water supply tap and  
disconnect the plug from the socket.  
Leave the door ajar in order to air the machine.  
13  
 
5. At the end of the programme turn the programme  
DRYING 3 KG OF COTTON  
You have for example just machine-washed and spun at  
1400 rpm 6 kg of laundry.  
selector dial to “Off” to switch the machine off.  
6. Remove the laundry.  
They are cotton fabrics of medium weight which you  
want to iron as soon as they are dry.  
Remove the laundry from the appliance and divide the  
items to obtain two loads of approx. 3 kg each.  
Note:  
The programme time will automatically increase by up  
to 1 minute, this is quite normal.  
The water tap must be open and the drain hose  
must be positioned in the sink or connected to  
the drain pipe.  
AUTODRYING 2 KG OF SYNTHETICS  
Warning! For NON-STOP programmes, it is also  
essential not to exceed the maximum load sizes of 3 kg  
for cotton and 2 kg for synthetics.  
1. Load the laundry.  
2. Turn the programme selector dial to the “Drying”  
programme for Cottons.  
You intend to wash and dry automatically 2 kg of  
synthetics which do not need ironing.  
3. If you wish to carry out the electronic drying,  
depress “Automatic dry” button until the light  
“Iron Dry” illuminates.  
Do not use a dosing device/ball when carrying  
out a washing & drying programme.  
Extra dry  
Store dry  
Iron dry  
1. Load the laundry.  
2. Add detergent and fabric softener.  
3. Switch the machine on by turning the selector dial  
Automatic  
dry  
to a programme for synthetics.  
4. Select the wash programme/fabric and temperature.  
5. Select the drying time or degree of drying.  
6. Select the required options by means of the relevant  
buttons. If possible, do not select a spin speed lower  
than that proposed by the appliance to avoid a too  
long drying time so saving energy.  
If you want a timed drying, depress the “Time dry”  
button until the time you want appears on the display  
(see page 20).  
In any case the reduction of the spin speed is only  
possible after selecting drying. The lowest values  
you can select are the following:  
- 900 r.p.m. for Cottons & Synthetics with electronic  
drying  
55  
Time  
dry  
- 900 r.p.m. for Cottons and 700 r.p.m. for  
Synthetics with timed drying  
7. Start the programme by depressing the  
Start/Pause” button.  
4. Press the “Start/Pause” button to start the  
8. At the end of the programme turn the programme  
selector dial to “Off” to switch the machine off.  
programme.  
9. Remove the laundry.  
Attention!  
Start/  
Pause  
During drying the door can only be opened for the first  
10 minutes and at the end of drying (after the cooling  
phase).  
14  
 
Washing and Drying Hints  
Do NOT overload the machine. Weigh the laundry the  
Some stains such as fruit, wine, grass, rust etc. are  
first few times you use the appliance.  
difficult to remove and should be treated before  
washing with specific products, which can be found  
in most household shops. In some cases it may help  
to soak the stain before washing with a special pre-  
soak product or biological detergent.  
The average weights of the most common items are  
listed below as a guide:  
1000g = 1 kg  
If you have used the machine to wash, rinse or spin  
only non-colour fast garments, there may be dye left  
in the sump. To ensure any subsequent wash is not  
contaminated with the dye, select and carry out a  
rinse and spin programme, without any garments, to  
ensure that any dye is removed from the sump.  
Sheet  
700-1000 g  
100-200 g  
400-500 g  
50-100 g  
Pillow case  
Tablecloth  
Serviette  
Do not leave the damp laundry load in a heap too  
long before drying.  
Avoid drying dark clothes with light coloured fluffy  
items such as towels as these can attract the fluff.  
If you overdry the laundry, besides wasting energy,  
any subsequent ironing may become more difficult  
because the fabric could be heavily crumpled.  
Remove the laundry when the appliance has finished  
drying.  
To avoid a static charge when drying is completed,  
use either a fabric softener when you are washing  
the laundry or a fabric conditioner specifically for  
tumble dryers.  
Particularly delicate items such as synthetic curtains,  
woollen and silk, garments with metal inserts, nylon  
stockings, bulky garments such as anoraks,  
bedcovers, quilts, sleeping bags and duvets must not  
be machine dried.  
Garments padded with foam-rubber or materials  
similar to foam-rubber must not be machine dried;  
they represent a fire hazard.  
Also, fabrics containing residues of setting lotions or  
hair sprays, nail solvents or similar solutions must  
not be machine dried in order to avoid the  
formation of harmful vapours.  
Tea towel  
70-120 g  
Linen hand towel  
Towelling hand towel  
Towelling bath towel  
Bath robe  
100-150 g  
150-250 g  
700-1000 g  
1000-1500 g  
200-300 g  
150-200 g  
Man’s shirt  
Apron  
Load the laundry loosely alternating large items with  
small ones.  
Sort the laundry according to the type of fabric,  
colour-fastness and how dirty it is.  
Avoid washing unhemmed or torn items as they  
may unravel.  
Before washing, empty all pockets of small objects  
which may have been left inside (coins, keys, screws  
etc). as these could damage the drain pump.  
When washing curtains, remove the hooks.  
Close poppers and zips and fasten loose buttons.  
It is essential to wash new coloured items separately  
when washing for the first time.  
For drying, follow the indications given on the  
manufacturer’s labels.  
When washing fabrics requiring different wash  
temperatures together, always select the lowest  
temperature.  
White items should not be washed with coloured  
items.  
Very small items (handkerchiefs, ribbons, socks etc)  
should be washed in a washing bag or a pillow case.  
Use a good quality detergent suitable for automatic  
washing machines.  
Use the correct quantities of detergent.  
For wool, use gentle detergent only in small  
quantities.  
Bleach is very corrosive; it should be used with care  
and kept out of reach of children.  
May be tumble dried  
Drying at high temperature  
Drying at reduced temperature  
Do not tumble dry  
Important:  
As a dryer, the machine works on the condensation  
principle.  
Therefore, the water tap must be open and  
the drain hose must drain water into a sink  
or into the drain pipe, even during the drying  
cycle.  
15  
 
Wash Care Symbols  
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling  
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct  
programme on your washing machine.  
WASHING SYMBOL  
WASH ACTION  
FABRIC  
White Cotton or Linen  
without Special Finishes  
Normal (Maximum)  
95  
Cotton, Linen or Viscose  
without Special Finishes  
Colourfast at 60°C.  
Normal (Maximum)  
60  
50  
Nylon, Polyester/Cotton, Viscose  
with Special Finishes,  
Cotton/Acrylic Mix.  
Reduced (Medium)  
Normal (Maximum)  
Reduced (Medium)  
Cotton, Linen or Viscose  
Colourfast at 40°C but not 60°C.  
40  
40  
Acrylics, Acetate, Triacetate, Wool  
mixes, Polyester/wool blends.  
Much Reduced (Minimum)  
Hand wash only  
Wool, wool mixtures, Silks  
Do not machine wash  
40  
BLEACHING  
Chlorine bleach may be used  
IRONING  
Cotton, Linen, Viscose  
Polyester mixtures, Wool  
Acrylic, Nylon, Polyester  
Hot iron  
Warm iron  
Cool iron  
DRY CLEANING  
TUMBLE DRYING  
May be dry cleaned. Other letters and/or a bar beneath the circle will  
indicate the required process to the dry cleaner.  
with high heat setting  
with low heat setting  
May be tumble dried  
A cross through any symbol means «DO NOT»  
X
fabric conditioner to avoid the conditioner entering the  
machine prematurely.  
When using liquid detergent and a prewash  
programme, place the detergent into the correct  
compartment in the dispenser drawer, after the  
prewash has finished.  
Important Notes  
For best results, always use the dispenser drawer for  
dispensing detergents and liquid additives.  
Once the dispenser has been filled, close it by pushing  
it in gently. This is particularly important if you are using  
16  
 
Washing programmes  
Consumptions*  
Programme/  
Type of laundry  
Available options  
Load  
Fabrics  
Energy  
Water  
litres  
Time  
min.  
temperature  
kWh  
Spin reduction/None  
Prewash  
Sheets, household  
linen, towels,  
tablecloths  
90°  
White  
6 Kg  
2.05  
55  
52  
154  
147  
cotton  
Cottons  
Quick  
Extra rinse  
Economy  
60°  
Sheets, household  
linen, towels,  
tablecloths  
Spin reduction/None  
Prewash  
White  
cotton  
6 Kg  
6 Kg  
1.65  
1.19  
Extra rinse  
Cottons  
Fast coloured and  
non-fast items, for  
example hand towels,  
sheets, underwear,  
tablecloths, shirts,  
blouses  
60°  
40° - 30°  
Spin reduction/None  
Prewash  
White and  
coloured  
cotton  
52  
143  
Quick  
Extra rinse  
Cottons  
Economy  
40°  
Coloured items, for  
example underwear,  
shirts, blouses  
Spin reduction/None  
Prewash  
Coloured  
cotton  
6 Kg  
3 Kg  
1.19  
1.05  
0.7  
52  
55  
55  
50  
147  
96  
Extra rinse  
Cottons  
Spin reduction/None  
Prewash  
Shirts, blouses,  
underwear, mixed  
fabrics  
60° - 40°-  
Synthetics  
Synthetics  
Synthetics  
Synthetics  
Quick  
Extra rinse  
Economy  
40°  
Synthetics  
Shirts, blouses,  
underwear, mixed  
fabrics  
Spin reduction/None  
Prewash  
3 Kg  
97  
Extra rinse  
Spin reduction/None  
Prewash  
Easy iron  
40°  
Shirts, blouses,  
underwear, mixed  
fabrics  
1.5 Kg  
0.35  
79  
Quick  
Extra rinse  
Synthetics  
None  
Quick  
40°  
Acrylic, polyester  
items, duvets  
2 Kg  
3 Kg  
0.55  
0.33  
54  
60  
67  
59  
Duvets  
Duvet  
Extra rinse  
None  
Prewash  
Quick  
Acrylic, viscose,  
polyester items,  
curtains  
30°  
Delicates  
Delicates  
Extra rinse  
Garments bearing the  
“ Pure new wool,  
non-shrink, machine  
washable” or “Hand  
wash” label  
40° -  
30° - Cold  
Wool  
Wool  
2 kg  
63  
57  
0.4  
Spin reduction/None  
The “Cottons 60° ” (white and coloured cottons) is the reference programme for the data entered in the energy  
label, in compliance with EEC 92/75 standards.  
* This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of  
laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest  
temperature provided for each programme.  
17  
 
Washing programmes  
Consumptions*  
Programme  
description  
Load  
Programme  
Available options  
Time  
Energy  
Water  
litres  
min.  
kWh  
Soak for 30 minutes  
at 30°C  
Soak 30°  
6 Kg  
0.43  
24  
20  
3 rinses  
Long spin  
(or short)** at the  
max speed  
Spin reduction/  
None  
Extra rinse  
47  
20  
Rinse  
6 Kg  
6 Kg  
0.18  
-
42  
1 rinse with liquid  
additive  
Long spin at max.  
speed  
Spin reduction/  
None  
Softeners  
20  
Drain  
For emptying out after  
the programme “Soak  
30° ” or at the end of a  
programme with  
None” option  
6 Kg  
6 Kg  
-
-
Water draining  
-
3
-
Drain and long spin at  
max. speed**  
Spin  
-
10  
Spin reduction  
None  
30 Minute wash  
Short cycle for lightly  
soiled fabrics  
Wash at 30°C  
2 rinses  
Short spin  
3 Kg  
0.35  
43  
30  
For cancelling the  
programme which is  
running or to switch  
the machine off  
-
-
-
-
Off (Reset)  
** If you reduce the spin speed by means of the relevant button to adapt it to the fabrics to be spun, the spin will  
become short.  
18  
 
Drying Programmes  
Timed drying  
Degree of  
drying  
Drying time  
mins  
Type of fabric  
Max. load  
Spin speed  
85-95  
1400  
3 kg  
1.5 kg  
3 kg  
Extra dry  
Ideal for towelling  
materials  
Cotton and linen  
(bathrobes, bath  
towels, etc.)  
1200  
1400  
90-100  
50-60  
1200  
55-65  
1400  
1200  
1400  
75-85  
80-90  
40-50  
Cotton and linen  
(towels, T-shirts,  
bathrobes)  
Store dry (*)  
Suitable for items  
to put away  
1.5 kg  
1200  
900  
45-55  
70-80  
without ironing  
Synthetics and mixed  
fabrics (jumpers,  
blouses, underwear,  
household linen)  
2 kg  
1 kg  
900  
35-45  
1400  
1200  
1400  
1200  
55-65  
60-70  
35-45  
40-50  
3 kg  
Iron dry  
Suitable for  
ironing  
Cotton and linen  
(sheets, tablecloths,  
shirts, etc.)  
1.5 kg  
(*) The STORE DRY drying programme for cotton is the reference programme for the Energy Label data, in  
compliance with EC directive 92/75.  
19  
 
Maintenance and Cleaning  
Before any maintenance or cleaning is carried out you  
must DISCONNECT the appliance from the  
electricity supply.  
Descaling  
The water we use normally contains lime. It is a good  
idea to periodically use a water softening powder in the  
C0114  
C0113  
machine. Do this separately from any laundry washing,  
and according to the softening powder manufacturer's  
instructions. This will help to prevent the formation of  
lime deposits.  
Cleaning the drawer recess  
Having removed the drawer, use a small brush to clean  
the recess, ensuring that all washing powder residue is  
removed from the upper and lower part of the recess.  
Replace the drawer and run the rinse programme  
without any clothes in the drum.  
After each wash  
Leave the door open for a while. This helps to prevent  
mould and stagnant smells forming inside the appliance.  
Keeping the door open after a wash will also help to  
preserve the door seal.  
Maintenance Wash  
With the use of low temperature washes it is possible  
to get a build up of residues inside the drum.  
We recommend that a maintenance wash be  
performed on a regular basis.  
P0038  
To run a maintenance wash:  
Cleaning the filter  
The water drain filter  
The drum should be empty of laundry.  
Select the hottest cotton wash programme.  
Use a normal measure of detergent, must be a  
powder (such as Ariel Futur).  
A clean filter is important for the correct functioning of  
the machine, and should therefore be cleaned after  
every washing programme.  
External cleaning  
Clean the exterior cabinet of the appliance with soap  
and water only, and then dry thoroughly.  
Open the filter door and place a container underneath  
to catch any spillage.  
Cleaning the dispenser drawer  
The washing powder and additive dispenser drawer  
should be cleaned regularly.  
Remove the drawer by pressing the catch downwards  
and by pulling it out. Flush it out under a tap, to  
remove any traces of accumulated powder.  
To aid cleaning, the top part of the additive  
compartment should be removed.  
P0861  
If the filter is blocked and the machine is unable to  
drain you will need to drain the water manually from  
the machine at this stage. To do this, unhook the drain  
hose from the standpipe or sink and hold the end of  
the hose over a bowl on the floor. The water should  
drain by gravity into the bowl. When the bowl is full,  
hook the hose back up and empty the bowl.  
20  
 
Repeat the procedure until water stops flowing out.  
Unscrew and remove the filter.  
The dangers of freezing  
If the machine is exposed to temperatures below 0°C,  
certain precautions should be taken.  
Turn off the water tap.  
Unscrew the inlet hose.  
Unhook the drain hose from the rear support and  
position the end of this hose and that of the inlet  
hoses in a bowl. Run the draining programme.  
To do this:  
P0860  
P0859  
Switch the machine on  
Clean carefully under a fast running tap.  
Select the “Drain” programme  
Press “Start/Pause” button  
Disconnect the appliance .  
Screw the inlet hose and reposition the drain hose.  
When you intend to start the machine up again,  
make sure that the room temperature is above 0°C.  
P0040  
Emergency emptying out  
If the water is not discharged, proceed as follows to  
empty out the machine:  
Warning  
When the appliance is in use and depending on the  
programme selected there can be hot water in the  
pump. Never remove the pump cover during a wash  
cycle, always wait until the appliance has finished the  
cycle, and is empty. When replacing the cover, ensure it  
is securely retightened so as to stop leaks and young  
children being able to remove it.  
• pull out the plug from the power socket;  
• close the water tap;  
• if necessary, wait until the water has cooled down;  
• open the filter;  
• place a bowl on the floor under the filter.  
• slightly loosen the filter to let the water come out  
slowly;  
Cleaning the water inlet filter  
• clean the filter if necessary as previously described;  
• screw the filter again and close the door.  
If your water is very hard or contains traces of lime  
deposit, the water inlet filter may become clogged.  
It is therefore a good idea to clean it from time to time.  
Turn off the water tap.  
Unscrew the water inlet hose.  
Clean the filter using a hard bristle brush.  
Tighten up the inlet hose.  
P1090  
21  
 
Something Not Working  
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily  
without calling out an engineer. Before contacting your local Service Force Centre, please carry out  
the checks listed below.  
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by  
incorrect use or installation, a charge will be made even if the appliance is under guarantee.  
During machine operation it is possible that one of the following alarm codes appears on the display:  
E 10  
E 2 0  
E 40  
-
-
-
: problem with the water supply  
: problem with water draining  
: door open  
Once the problem has been eliminated, press the “Start/Pause” button to restart the programme. If after all  
checks, the problem persists, contact your local Service Force Centre.  
Symptom  
Possible causes  
The machine does not start  
E 40  
The door has not been closed. (  
)
The plug is not properly inserted in the power socket.  
There is no supply at the socket.  
The main fuse or the fuse in the plug has blown.  
The “Start/Pause” button has not been depressed.  
The “Delay start” option has been selected.  
The machine does not fill  
E 10  
The water tap is closed. (  
The filter in the inlet hose is blocked. (  
The inlet hose may be squashed or kinked. (  
)
E 10  
)
E 10  
)
E 40  
The door has not been closed. (  
)
The machine fills then empties  
immediately  
The end of the drain hose is too low.  
The end of the drain hose is submerged in water.  
There is no vent in the end of the drain hose.  
The machine does not empty  
and/or does not spin  
E 2 0  
The drain hose may be squashed or kinked. (  
)
E 2 0  
The drain filter may be blocked. (  
)
The “None” option has been selected.  
The drainage system pipes are blocked.  
The programme “Soak 30°”, which ends with water left in the tub,  
has been selected.  
The wash load is unbalanced: redistribute the clothes inside the drum  
to allow the machine to spin.  
Too much detergent or unsuitable detergent has been used (creates  
too much foam).  
Check whether there are any leaks from the inlet hose fittings. It is not  
always easy to see this as the water runs down the hose; check to see  
if it is damp.  
There is water on the floor  
The drain hose may be damaged or not securely positioned.  
The filter has not been fully screwed in after cleaning.  
Unsatisfactory washing results  
Too little detergent or unsuitable detergent has been used. An  
insufficient amount of detergent leaves the laundry looking grey and  
causes lime scale to form.  
Stubborn stains have not been treated prior to washing  
The correct wash programme/temperature has not been selected.  
Too much laundry has been placed in the drum.  
22  
 
Symptom  
Possible causes  
The machine vibrates when  
spinning  
The internal packing has not been removed.  
The machine is in contact with the wall or furniture.  
The machine is not level and stable (check diagonally).  
The washing load is badly distributed in the drum.  
Maybe there is very little laundry in the drum.  
The door will not open  
The water level is above the bottom edge of the door.  
The machine is heating the water.  
The drum is turning.  
In any case the door can be opened only when the door locked  
light has gone out.  
The electronic balance control device has cut in because the laundry is  
Spinning starts late or the  
machine does not spin  
not evenly distributed in the drum. The laundry is redistributed by  
reverse rotation of the drum. This may happen several times before  
the unbalance disappears and normal spinning can resume. If, after few  
minutes, the laundry is still not evenly distributed in the drum, the  
machine will not spin. In this case, redistribute the load manually and  
select the spin programme.  
The machine makes an unusual  
noise  
The machine is fitted with a type of motor which makes an unusual  
noise compared with other traditional motors. This new motor  
ensures a softer start and more even distribution of the laundry in the  
drum when spinning, as well as increased stability of the machine.  
No water is visible in the drum  
Machines based on modern technology operate very economically  
using very little water without affecting performance.  
The machine does not dry or  
does not dry properly  
The drying time or degree of drying has not been selected  
E 10  
The water tap is not turned on (  
)
E 2 0  
The drain filter is clogged (  
The machine is overloaded  
)
The selected drying time or degree of dryness was not suitable for the  
laundry.  
1. Your name, address and post code  
2. Your telephone number  
3. Clear and concise details of fault  
4. The model and serial number of the appliance (found  
on the rating plate - see picture)  
Service & Spare Parts  
In the event of your appliance requiring service, or if  
you wish to purchase spare parts, please contact our  
extended warranty administrators by telephoning:  
5. The purchase date.  
0870 01 07887  
Please note that a valid purchase receipt is  
required for in-guarantee service calls.  
They will give you details for your local Service Force  
Centre.  
Before calling out an engineer, please ensure you have  
read the details under the heading “Something Not  
Working”.  
When you contact the Service Centre you will need to  
give the following details:  
P
r o  
M
d
N
o
d
.
.
.
.
.
.
.
.
.
.
o . . . . . . . . . . . .  
. .  
S
e r  
.
N
o
. . . . . . . . .  
.
Mod. ..........  
Prod. No. ...........  
Ser. No. .........  
P0042 BD  
23  
 
Installation Instructions  
It is dangerous to alter the specifications or  
attempt to modify this product in any way.  
Care must be taken to ensure that the appliance  
does not stand on the electrical supply cable.  
Any electrical work required to install this  
appliance should be carried out by a qualified  
electrician or competent person.  
Any plumbing work required to install this  
appliance should be carried out by a qualified  
plumber or competent person.  
Technical Specifications  
DIMENSIONS  
Height  
Width  
Depth  
85 cm  
60 cm  
59 cm  
POWER SUPPLY VOLTAGE  
TOTAL POWER ABSORBED  
230-240 V/50 Hz  
2050 W (10 A)  
WATER PRESSURE  
Minimum  
Maximum  
0.05 MPa (0.5 bar)  
0.8 MPa (8 bar)  
Washing  
MAXIMUM RECOMMENDED LOAD  
Cotton, linen  
Synthetics  
Duvet/Delicate fabrics  
Wool/Hand wash  
Drying  
6 kg  
3 kg  
3 kg  
2 kg  
Cotton, linen  
Synthetics  
3 kg  
2 kg  
SPIN SPEED  
Maximum  
1400 rpm  
CONSUMPTION DATA FOR WASHING  
6 KG NORMALLY SOILED COTTON  
ITEMS WITH PROGRAMME “COTTONS 60°”  
(White and Coloured Cottons):  
Energy  
Water  
1.19 kWh  
52 litres  
This appliance complies with the following E.E.C. Directives:  
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;  
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.  
24  
 
Set the machine upright and unscrew the remaining  
rear screw. Slide out the relevant pin.  
Fill all the holes with the plastic plugs supplied with the  
instruction booklet.  
Unpacking  
All transit bolts and packing must be removed  
before using the appliance.  
You are advised to keep all the packaging for re-use in  
case the machine is to be transported again.  
Using a spanner unscrew and remove the two rear  
bottom screws. Slide out the two plastic pins.  
Lay the machine gently on its back, making sure that the  
hoses are not squashed.  
P1128  
P0002  
Positioning  
Install the machine on a flat hard floor.  
Make sure that air circulation around the machine is  
not impeded by carpets, rugs etc. Check that the  
machine does not touch the wall or other kitchen  
units.  
P0001  
P1129  
Never place cardboard, wood or similar materials  
under the machine to compensate for any unevenness  
in the floor.  
Remove the polystyrene block from the bottom of the  
machine and release the two plastic bags.  
Very carefully slide out the left polythene bag, removing  
it towards the right and then downwards.  
Your new washer-dryer has been designed to be  
permanently plumbed in to your home’s water supply  
and drainage system. However, if this is not possible, it  
may be connected to a suitable existing tap with the  
drain hose discharging into a sink.  
1
2
The appliance has an inlet hose, with female 3/4” BSP  
thread connector. If this connection is not compatible  
with the plumbing of the existing installation, a variety  
of connectors are available from good hardware stores  
and plumbers merchants to suit most domestic  
plumbing. Any alteration to your existing plumbing  
must be carried out by a competent person, or  
qualified plumber.  
3
P1124  
P1126  
Repeat the operation for the right polythene bag,  
removing it towards the left and then upwards.  
Installation on a Suspended  
Floor  
Suspended wooden floors are particularly susceptible  
to vibration. To help prevent vibration we recommend  
you place a waterproof wood panel, at least 15 mm  
thick under the appliance, secured to at least 2 floor  
beams with screws. If possible install the appliance in  
one of the corners of the room, where the floor is  
more stable.  
P1127  
Remove the polystyrene base.  
25  
 
Water inlet  
Connect the hose to a tap with a 3/4” thread.  
Always use the hose supplied with the appliance to  
connect to the water supply.  
Do not use previously used hoses for water  
connection.  
U” piece  
supplied  
P1199  
Place the drain hose into your standpipe, which should  
have an internal diameter of approximately 38mm thus  
ensuring there is an air break between the drain hose  
and standpipe.  
38 mm (11.2”)  
standpipe  
diameter  
P1088  
Installation should comply with local water authority  
and building regulations’ requirements.  
The appliance must be connected to a cold  
water supply.  
A minimum water pressure of 0.05 MPa (0.5 bar) is  
required for safe operation of the appliance.  
When discharging into a standpipe ensure that the top  
of the standpipe is no more than 90cm (35.4'') and no  
less than 60cm (23.6'') above floor level.  
If you cannot make the cold water connection direct  
from the rising mains, you may be able to operate the  
appliance from your cold water storage system.  
3 pin  
There should be a minimum distance of 5.02m  
(16.5 ft) between the appliance’s inlet and the bottom  
of the water storage tank.  
Set the hose correctly by loosening the ring nut. After  
positioning the inlet hose, be sure to tighten the ring  
nut again to prevent leaks.  
P1039  
The drain hose may be extended to a maximum of 4  
metres. An additional drain hose and joining piece is  
available from your local Service Force Centre.  
The joining piece must have an internal diameter of  
18 mm.  
P0021  
If your drain hose looks like this (see below) you do  
not require the “U” piece”. Just push the hose firmly  
into the standpipe.  
Water drainage  
This appliance is designed to be permanently plumbed  
into your home's drainage system using one of the  
following methods.  
1. Into a drainage standpipe.  
Firstly form a hook in the end of the drain hose using  
the “U” piece” supplied.  
P1212  
26  
 
2. Onto a sink outlet spigot.  
Levelling  
Level the washing machine by raising or lowering the  
feet. The feet may be tight to adjust as they incorporate  
a self locking nut, but the machine MUST be level and  
stable (check diagonally).  
If the outlet spigot has not been used before, remove  
any blanking plug that may be in place.  
P1197  
P1051  
Push the drain hose onto the spigot and secure with a  
clip if required, ensure a loop is formed in the drain  
hose (see diagram) to prevent waste from the sink  
entering the washing machine.  
Any necessary adjustment can be made with a spanner.  
Accurate levelling prevents vibration, noise and  
displacement of the machine during operation.  
Some vibration is inevitable, especially if mounted on a  
wooden floor.  
Sprung wooden floors are particularly susceptible to  
vibration. For advice, consult a builder. If possible,  
always place the machine on a solid floor.  
Loop  
Special conditions  
P1198  
If the floor is carpeted or covered with crumbly or soft  
material, insert a rigid support base under the feet to  
prevent noise, vibration or displacement. The base  
should protrude a few centimetres beyond the edges of  
the machine.  
The drain hose may be extended to a maximum of 4  
metres. An additional drain hose and joining piece is  
available from your local Service Force Centre.  
The joining piece must have an internal diameter of  
18mm.  
Warning  
Important  
The machine should NOT be placed on deep pile  
carpeting.  
Before connecting the machine to new pipework or to  
pipework that has not been used for some time, run off  
a reasonable amount of water to flush out any debris  
that may have collected in the pipes.  
Note  
Please ensure that when the appliance is installed it is  
easily accessible for the engineer in the event of a  
breakdown.  
In the interest of the  
environment  
Washing machines and dishwashers should be  
connected to the FOUL drainage system, the water will  
then be taken to a sewage works for treatment before  
being discharged safely into a river.  
It is essential that these appliances are not connected  
to the surface water drainage system as this water is  
discharged directly into a river or stream and may  
cause pollution.  
27  
 
If you require any further advice please contact your  
local water authority.  
The appliance is supplied with a 13amp plug fitted.  
In the event of having to change the fuse in the plug  
supplied, a 13amp ASTA approved (BS1363/A) fuse  
must be used.  
Should the plug need to be replaced for any reason,  
proceed as described below.  
The wires in the mains lead are coloured in accordance  
with the following code:  
Green and Yellow  
Blue  
- Earth  
- Neutral  
- Live  
SHOWER  
Brown  
SINK TOILET  
BATH  
BIDET  
GREEN & YELLOW  
E
WASHING  
MACHINE  
DISHWASHER  
L
RAINWATER  
'RUN-OFF'  
N
FOUL DRAIN  
BROWN  
SURFACE WATER  
DRAINS & SEWERS  
FOUL SEWERS  
BLUE  
CORD CLAMP  
SEWAGE  
TREATMENT  
WORKS  
P1041  
UNTREATED  
DISCHARGE  
TREATED  
DISCHARGE  
The wire coloured green and yellow must be  
RIVER  
RIVER  
connected to the terminal marked with the letter «E»  
P0987  
or by the earth symbol  
yellow.  
or coloured green and  
The wire coloured blue must be connected to the  
terminal marked «N» or coloured black.  
Electrical connection  
Any electrical work required to install this appliance  
should be carried out by a qualified electrician or  
competent person.  
The wire coloured brown must be connected to the  
terminal marked «L» or coloured red.  
Upon completion there must be no cut, or stray  
strands of wire present and the cord clamp must be  
secure over the outer sheath.  
WARNING: THIS APPLIANCE MUST BE  
EARTHED.  
WARNING:  
The manufacturer declines any liability  
should this safety measure not be  
observed.  
A cut off plug inserted into a 13 amp  
socket is a serious safety (shock) hazard.  
Ensure that the cut off plug is disposed of  
safely.  
Before switching on, make sure the electricity supply  
voltage is the same as that indicated on the appliance’s  
rating plate. The rating plate is located at the top of the  
rim of the open door.  
The power supply cable must be easily  
accessible after installing the appliance.  
Permanent connection  
In the case of permanent connection it is necessary  
that you install a double pole switch between the  
appliance and the electricity supply (mains), with a  
minimum gap of 3mm between the switch contacts and  
of a type suitable for the required load in compliance  
with the current electrical regulations.  
P
r o  
M
d
N
o
.
d
.
.
.
.
.
.
.
.
.
.
.
o
.
.
.
.
.
.
.
.
.
.
.
.
S
e r  
.
N
o
. . . . . . . . .  
.
Mod. ..........  
Prod. No. ...........  
Ser. No. .........  
P0042 BD  
The switch must not break the yellow and green earth  
cable at any point.  
28  
 
John Lewis partnership  
171 Victoria Street  
London SW1E 5NN  
 

Invacare Mobility Aid Back Support User Manual
John Deere Tablet Accessory 1070D User Manual
Kambrook Slow Cooker KSC450 User Manual
Kenmore Sewing Machine 38511607 User Manual
Kenwood Stereo Amplifier KAC X40 User Manual
KitchenAid Mixer KSM150AGBCA0 User Manual
KitchenAid Oven KEBK101 User Manual
KitchenAid Refrigerator 2200139A User Manual
Konica Minolta All in One Printer SU2 User Manual
Kramer Electronics Camcorder 104LN User Manual